Free for homeowners

What size furnace filter do I need?

The easiest answer is printed on the edge of the filter that's in there now. If that's gone, here's how to measure it — and why the number on the box isn't the number you'd get with a tape measure.

Nominal size versus actual size

This is the thing that confuses everyone. Filters are sold at a nominal size — a rounded number like 16x25x1 — while the filter in the sleeve actually measures roughly half an inch smaller in each direction, and a 1-inch filter is usually about three quarters of an inch thick.

That's deliberate: the filter has to slide into the slot. So if you measure 15.5 by 24.5 with a tape, you need a filter sold as 16x25. Don't go hunting for a filter printed with the measurement you took.

How to get it right

Best: read the old one

The nominal size is printed on the cardboard edge. Write it down before you throw it away — this is the step people regret.

Next best: measure the slot

Measure the opening, round up to the nearest inch, and buy that nominal size.

Watch the depth

A 1-inch and a 4-inch filter are completely different animals. The slot decides, not preference.

Mind the arrow

It points toward the blower, in the direction of airflow. Backwards, it still filters, but it collapses and chokes the system.

Some systems take two

Larger homes often have a return in more than one place. Check for a second filter grille before you assume you are done.

Which MERV to buy

MERV rates how fine the filtration is. Higher is not automatically better: a filter too restrictive for your system starves it of air, which costs efficiency and, over time, equipment.

MERVCatchesGood for
MERV 5–8Dust, lint, pollenMost homes. The default, and easy on airflow.
MERV 9–12Finer dust, some mold sporesAllergies, pets. Check your system can take it.
MERV 13+Smoke and very fine particlesSpecific needs, and only if the system is designed for it.

If you are unsure what your system tolerates, ask the company that services it — the answer depends on duct design, not just the furnace.

How often to change it

A 1-inch filter typically wants replacing every one to three months while the system is running. A thicker 4- or 5-inch media filter usually runs six to twelve months. Pets, dusty roads, allergies and any construction in the house all shorten it.

Rather than guess, check it monthly for the first few months and learn your own house. Then write the size and the date down once, and never measure again.

Record the size once.

Free, no card. Keep the filter size and the last change date in your home record, so the right filter is a glance away instead of a trip to the basement with a tape measure.

Start your free home record See what it does

Questions people ask

How do I know what size furnace filter to buy?

Read the nominal size printed on the edge of the filter that is in the system now, such as 16x25x1. If it is gone, measure the slot and round up to the nearest inch in each direction.

Why is my filter smaller than the size printed on it?

Filters are sold at a nominal, rounded size and manufactured slightly smaller so they slide into the slot. A 16x25x1 filter really measures about 15.5 by 24.5 by 0.75 inches. That is normal.

Which way does the arrow go?

The arrow points in the direction the air flows, which means toward the blower and away from the return duct. Installed backwards the filter can collapse and restrict airflow.

Is a higher MERV always better?

No. A filter more restrictive than your system was designed for reduces airflow, which costs efficiency and can stress the equipment. MERV 5 to 8 suits most homes; ask whoever services your system before going higher.

Your home record, free. Service history, equipment and your pros in one place.